Paper flowers using quilling technique: photo, how to make simple and complex three-dimensional paintings

Quilling flowers are currently very popular, because with their help you can not only beautifully, but very effectively decorate a gift box, box, jewelry box, photo frame, album or holiday card. Any composition made in this way looks unusual and truly luxurious. The technique itself is quite simple, but it requires patience and a certain amount of time, but the result is worth it.

Quilling is otherwise known as "paper rolling" as this method involves twisting long, thin strips of paper. It is worth noting that having decided to do such an application, you will definitely need to choose a scheme, otherwise, trying to improvise, you can get confused. And how to make flowers using the quilling technique, we will try to describe in detail and in an accessible way in this article.

DIY quilling flowers: step by step instructions

Before starting work, it is necessary to prepare tools and materials: thick double-sided paper, scissors, PVA glue, pencil, ruler, compasses, awl. As for paper, it can be of different textures and shades. The composition of mother-of-pearl, matte, shiny paper will look most advantageous. The application can be flat or voluminous, it all depends on the idea of ​​​​the master.

Quilling paper flowers are made as follows:

1 The cut strips are twisted into spirals. For this purpose, you can use an awl or a thin rod.

2 Spirals are shaped by pressing or pressing down.

3 After that, the parts are glued together and fixed to the base.

There are many options for how to make quilling flowers. Each of them will require a diagram that includes the outline of the picture and the elements themselves that fill it. For beginners, it will be a difficult task to arrange the shapes within the outline of the drawing, so it is better to gain experience on simple compositions and patterns. It is recommended to use step-by-step instructions and detailed diagrams, which indicate how many elements need to be prepared for work, as well as their sizes. All parts are prepared in advance, after which, based on the scheme, they are assembled and fixed to the base. It's like design.

After mastering the simplest steps, most people who are carried away by the technique and understand its essence begin to work with more complex compositions, but without relying on the scheme, using only their spatial imagination.

Everyone who decides to start creating compositions for the first time is recommended to watch master classes on the topic “Quilling Flowers for Beginners":

Master classes, first of all, are worth watching for beginners, because how to make flowers using the quilling technique is explained step by step:

Spiral making. The most important thing in this work is to learn how to make spirals, as this is the key to a neat, beautiful application.

To make spirals for the pattern, you need to cut strips of paper of the desired thickness. Before you start winding it on the tool, it is recommended to run a ruler or fingernail along it, after which the strip will bend and become more obedient.

Now it can be wound on a tool (awl, toothpick, etc.). Work should be done very carefully, holding the strip with a slight tightness. After it is completely wound on the instrument, it is better to leave it in this form for a few minutes so that the shape is preserved. Then the resulting spiral is removed from the tool.

Creating a fringe for flowers. Making a fringe is not difficult, but for this you need to try and spend some time.

For manufacturing, you need a strip 1.5 cm wide. With the help of scissors, you need to make numerous cuts on it, which will fluff up and help you get voluminous petals.

Easy Ways to Create Flowers

Even the simplest quilling flowers look original and very beautiful.

How to create a small masterpiece is detailed below:

1 option.

The first step is to make the petals. To do this, prepare two thin strips (10 mm wide) of different shades and glue them together. Since the flower will have 10 petals, you need to make 10 such strips.

Roll each two-color strip into a spiral with a diameter of 2 cm, then squeeze it hard to give it the shape of an eye.

To give the petal an unusual shape, you need to twist one end of it with a thin, sharp object (awl, toothpicks). The petal is ready. Do this work with the remaining 19 petals.

At the second stage, the core of the flower is made. Two strips of different colors are fastened together, for example, yellow and green. The resulting strip is twisted into a spiral and glued over the edge. The finished core is glued to the cardboard base, and 10 petals are glued around it.

You can make several of these flowers and use them to decorate a postcard, photo frame or something else, you just have to show your imagination.

Option 2.

The most simple and beautiful quilling flowers are, perhaps, roses. Even a person with no experience in this art can make them.

First, a spiral with 5 curls is drawn on a dense sheet of the desired shade. Then, along the line of curls, the spiral is cut out.

Using a special tool with a metal rod and a slot, designed to perform this technique, the resulting spiral strip is twisted into a bud, the edges are fastened with glue.

Having made several of these buds, you can create a charming composition.

3 option.

From paper strips of red or pink color, you will need to form 5 spirals with a diameter of 3 cm, glue them together, and then form 5 more spirals of a smaller size, with a diameter of 1.5 – 2 cm.

Smaller modules are glued on top of larger ones, thus, a bud is obtained. To create an integral composition, it is necessary to make a stem and petals.

To properly arrange the stem, you need to fold a long strip of green color like an accordion, fix the fold points for 1 minute with pins.

After this time, the pins can be removed, the stem attached to the base.

They make the stem in another way:

1 A strip of paper is folded into a V-shape, and its edges are twisted into a thin spiral.

2 All parts are attached to the base with PVA glue.

Below are photos of interesting works with the manufacture of flowers using the quilling technique:

Bulk flowers. Chamomile, sunflower

Volumetric flowers using the quilling technique are very beautiful, interesting, bewitching. They are used both for decorating postcards and for decorating some decor elements.

Chamomile.

We propose to create a chamomile using this method. To do this, you need white, yellow and green paper, as well as a standard set of tools. The width of each strip of paper should be 3 cm. The strips are wound on an awl, toothpick or special tool.

The resulting roll is removed from the tool and slightly loosened (it should not be tight). To give the petal an oval shape, pinch it slightly, but only on one side.

This will form a droplet. The edge of the strip is fastened with glue. You will need a lot of such droplet petals, the more there are, the more magnificent the flower will turn out.

Now you need to make the core of the flower from yellow paper. On a yellow strip, frequent cuts are made from one edge, so a fringe is obtained. After that, the strip is folded into a spiral. Petals are attached to the back.

The stem is recommended to be made of corrugated paper, which must be carefully wound on the wire in an even layer, so that there are no gaps. Attach a flower to the end of the wire. The finished chamomile should be glued to the base, resulting in a three-dimensional composition.

Sunflower.

Do-it-yourself quilling flowers can be very different, but the sunflower looks bright, expressive and very impressive.

To work, you will need quilling tools, yellow, black and green paper, PVA glue, floral tape, pins, cardboard, circle templates, wire, ruler.

At the first stage, petals are made, which should be 2 rows in a medium-sized sunflower, 15 pieces in each row. If the flowers are planned large, then there will be more petals.

Petals are made from a sixty-centimeter strip of yellow paper. The strips are wound on a tool or a toothpick. Ready rolls are unrolled to a diameter of about 3 cm, making measurements with a ruler. The edges of the rolls are treated with glue and fixed. After that, you need to give the roll the shape of a drop, as described above. Then you should pinch one edge of the petal with your finger and move the middle of the roll to the opposite edge. Pins and glue will help to fix the rolls. Now you need to make a few more of these petals.

At the second stage, a sunflower core with a diameter of 2–3 cm is made. This will require black colored paper and several miniature rolls of black thin strips. Each such roll is a sunflower seed. The seeds should be cone-shaped, so using a sharp tool, you need to slightly squeeze out the middle of the roll. The resulting parts are glued to the core until it is completely filled with such seeds.

In the third step, the stem is created. For its manufacture, a soft thin wire is taken and divided into 3 segments 15–20 cm long. All segments are wrapped at a slight angle with floral tape. If not, colored paper will do.

The fourth stage is the assembly of flowers. First you need to prepare a funnel from green cardboard by cutting out a circle with a diameter of 3-4 cm. Make an incision on it from edge to middle. Treat the edges of the incision with glue and connect together to form a funnel. A stem is attached to the back of the funnel, to its sharp corner. The first row of petals is glued to the edges of the funnel, then the core and the second row of petals are attached.

We must not forget about the leaves of this amazing flower. They are made from double-sided green paper, giving the desired shape. Notches are cut along the edges of the leaves. On the sheet itself, you can draw veins with a felt-tip pen, so the plate will look natural. It is enough to prepare 5 – 6 sheets of different sizes. At the end of the work, glue them to the stem. Having made 3 – 5 of these sunflowers, you can get a picture of flowers using the quilling technique. One has only to glue them to the base and insert them into a photo frame of a suitable format. As a basis, both cardboard and any other thick paper are suitable.

You can make voluminous flowers using the quilling technique, based on a master class that describes in detail the process of creating real paper masterpieces:

What different flowers

Since the paper for this work can be used in a variety of ways, from ordinary color to shiny, the scope for imagination is unlimited. You can make a bouquet of flowers using the quilling technique by combining 3, 5 or more copies in it.

Such an application will be a wonderful decorative addition to the interior of any room and will delight the eye with its beauty every day.

Many people like wild flowers for their brightness, sweet simplicity and attractiveness. Using wildflowers using the quilling technique, craftsmen create magnificent colorful paintings depicting a colorful, cheerful meadow. For their manufacture, paper of blue, yellow, red, pink, blue, orange and other shades is suitable, because the color scheme of field plants is diverse.

Ready-made flowers can be glued to a paper base, or, by making long stems using wire, fix them in a small wicker basket, laying green grass finely cut from paper on the bottom.

How to make wild flowers using the quilling technique, we recommend that you look at special sites dedicated to this art.

Autumn quilling flowers will serve as an exquisite decoration of the house, and such a bouquet will last for a very long time without fading and without losing its beauty.

How to make a bouquet of asters is detailed below:

For the manufacture of flowers, you will need yellow stripes 3 mm wide and lilac stripes 10 mm wide. The edges of the lilac stripes are cut with a small fringe. There should be a lot of such blanks, the more there are, the more luxurious the bouquet will turn out.

Ready lilac strips are glued from one end to the end of the yellow strip.

After that, the resulting strips of two colors are twisted into a spiral. The edges are treated with glue.

In the same way, monochrome lilac stripes are twisted.

Now you should make a receptacle to which all parts of the flower will be attached. To do this, strips 3 mm wide are twisted into rolls, with the help of a toothpick their middle is slightly pulled out and filled with glue inside.

While the glue dries, you need to make the stems. The floral wire is divided into parts 15 cm long. The wire is threaded into the receptacle, and its end is fixed inside it in the form of a loop. Such parts need to be made as many as flowers are made.

When all the parts are ready, you need to start assembling them. You need to take a green strip 3 mm wide, coat it with glue, put it between the flower and the receptacle, connecting them together. Do the same with other blanks. After that, you will need to fluff the asters, gradually opening each row of petals, starting from the bottom.

To get half-blown asters, you need to glue lilac blanks without a yellow core into the receptacle and fluff them.

Thus, you can make a panel using the “bouquet of flowers” ​​quilling technique by combining asters into bunches of several pieces each and gluing them to thick paper. On one panel there can be 1 large bunch, or 2 – 3 bunches of larger and smaller sizes. A beautiful frame will give the finished look to the work.

You can draw ideas for making unusual flowers using the quilling technique by viewing master classes:

Experienced craftsmen share their knowledge and skills, offering to perform even the most laborious work together with them.

In conclusion, I would like to note that, using this method, you can make not only flowers, but also other products, for example, animals, Christmas decorations, little men and much more.

Such an activity is not only a kind of pleasant pastime, but also a way of self-expression, as well as a means of creative and aesthetic development of the individual.

Quilling is recommended for both children and adults, because it is useful to develop and show your creative potential at any age.